Setting Up Your Tv; Connecting An Antenna, Cable Tv, Or Satellite Tv; Connecting A Standard Video Device - Insignia NS-LTDVD32-09 Guide De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Setting up your TV

Connecting an antenna, cable TV, or
satellite TV
To connect an external antenna, cable TV, or
satellite TV:
1 Plug the antenna cable (2) from an antenna,
cable TV, or satellite receiver (3) to the
ANT.INPUT jack on your TV.
2 Turn on your TV.
3 Press INPUT, then press
10

Connecting a standard video device

/
to select TV.
www.insignia-products.com
Insignia NS-LTDVD32-09 32" LCD TV/DVD Combo
Note
Your TV supports multiple video source inputs. For
temporary or easy-access video connections, use
the side jacks (AV2). For more permanent
connections, use the rear jacks (AV1).
To connect a standard video device to the
AV1 jacks:
1 Plug an RCA video cable (4) into a standard
video source (5) and into the VIDEO jack on
the back of your TV.
2 Plug the RCA audio cables (2) into the video
device's audio output jack and into the upper
AUDIO L and AUDIO R jacks on the back of
your TV.
3 Turn on your TV.
4 Press INPUT, then press
To connect an external video device to the
AV2 jacks:
1 Plug the RCA video connector (8) into a
standard video device (5) and VIDEO jack (6)
on the side of your TV.
2 Plug the RCA audio connectors (7) into the
audio out jacks on the video device and into
the AUDIO L and AUDIO R jacks (6) on the
side of your TV.
3 Turn on your TV.
4 Press INPUT, then press
/
to select AV1.
/
to select AV2.

Publicité

Table des Matières
loading

Table des Matières