Using The Tv Massage Chair; Set The Lying Position - Duo Collection CADILLAC Instructions De Service

7. Then connect the (A) and (B) connectors to each other. (B) is the
connection for the remote controlling of the massage function
8. Put the plug (H) into the mains socket.
9. Then, in the order indicated, connect the (I) and (G) connectors
to each other, and afterwards connect the (L) connector to the power
supply unit (K).
10. Put the plug (M) into the mains socket.
11. The cover
tightly across the seat of the chair and so that the cables are covered.

Using the TV Massage Chair

WARNING!
Risk of injury!
Improper use of the TV Massage Chair can result in
serious injury.
• If the event of any fault with the electrics, please contact a
specialist. Damaged electrical devices should not be used.

Set the lying position

In this mode, you can adjust the back rest and the foot rest on the
TV Massage Chair. This means you can reach a lying position.
1. Sit in the TV Massage Chair.
2. Press the button for lying position
The back rest moves back. The foot rest moves up.
3. If you do not want a full lying position, you can select an intermedi-
ate position. To do this, press the lying position button until you have
reached the position you want.
4. If you release the button, the back rest and foot rest stop moving.
Betriebsanleitung_TV_Sessel_Cadillac_20401431.indd 96
5
has a Velcro fastener. Fit the cover so that it fits
9
on your remote control
96
7
.
17.12.18 09:05