socomec DIRIS Ap Notice D'utilisation page 47

17 PROGRAMMING COMMUNICATION SPEED (COM BDS)
NB: The speed default setting is 9600 BDS (BDS 9600). If you want this value, press
cation parity programming (COM PAR). If not, proceed as follows:
KEYS INSTRUCTION
Press once
Press once
Press once
Press once
18 PROGRAMMING COMMUNICATION PARITY (COM PAR)
NB: As a default setting, the communication is without parity (PAR NO). If you want this setting, press
to communication stop bit programming (COM STOP). If not, proceed as follows:
KEYS INSTRUCTION
Press once
Press once
Press once
SOCOMEC - Ref. : 875 510A
DISPLAY COMMENT
to display flashing 9600 bauds
Press again for:
38400, 2400, 4800 and 9600 bauds
Press again for:
2400, 38400, 19200 and 9600 bauds
Confirm speed.
Press on
programming (PAR).
DISPLAY COMMENT
No parity
ou
Press again for:
EVEN (even parity) and NO (without
parity)
Press again for:
ODD (odd parity) and NO (without
parity)
(OPTION)
. You will pass to communi-
to pass to parity
(OPTION)
. You will pass
47