Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
Damaged insert tools will normally break apart during
this test time.
► Wear personal protective equipment. Depending
on the application, use a face shield, safety
goggles or safety glasses. As appropriate,
wear a dust mask, hearing protection gloves.
The eye protection must be capable of stopping flying
debris generated by various operations. The dust mask
or respirator must be capable of filtrating particles
generated by your operation. Prolonged exposure
to high intensity noise may cause hearing loss.
► Keep bystanders a safe distance away from the
work area. Anyone entering the work area must
wear personal protective equipment.
Fragments of workpieces or of a broken accessory
may fly away and cause injury beyond immediate
area of operation.
► Keep the power cord away from rotating applica-
tion tools
If you lose control of the power tool, the cord may be
cut or snagged and your hand or arm may be pulled
into the spinning accessory.
► Pay attention to metallic objects in the under-
ground
If the floor is provided with metal parts, they must be
removed before each grinding.
Additional safety warnings
Wear eyes and ear protection
► Use suitable detectors to determine if utility lines
are hidden in the work area or call the local utility
company for assistance.
Contact with electric lines can lead to fire and electric
shock. Damaging a gas line can lead to explosion.
Penetrating a water line causes property damage or
may cause an electric shock.
► When working screed, use dust extraction. The
Wolff GmbH & Co KG | D-74360 Ilsfeld | Ungerhalde 1 | Fon: +49 (0)7062-91556-0 | Fax: +49 (0)7062-91556-41 | www.wolff-tools.de
18
vacuum cleaner must be approved for the extrac-
tion of stone dust.
Using this equipment reduces dust-related hazards.
► When working with the machine, always hold it
firmly with both hands and provide for a secure
stance.
The power tool is guided more securely with both
hands.
► Never use the machine with a damaged cable. Do
not touch the damaged cable and pull the mains
plug when the cable is damaged while working.
Damaged cables increase the risk of an electric shock.
Noise/vibration information
Wear hearing protection.
Measurements determined in accordance with
EN 60745
The A-rated sound pressure level of the machine
is normally
Sound pressure level .........................dB(A)
Sound power level.............................dB(A)
Margin of error ..................................K=d +/- 1,5 dB
Warning
Wear hearing protection!
Overall vibration values
(vector sum of three directions)
determined in accordance with EN 60745:
Vibration emission level .....................ah =
Margin of error .....................................K = +/- 1,5 m/s²
The vibration emission level indicated in this informa-
tion sheet has been measured in accordance with a
standardised test specified in EN 60745 and may be
used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main
90,2
101,2
4,1 m/s²
Publicité
Table des Matières
