Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
> Before Start
> Part Names
5. Connect Other Cables
1
a
3
c
a DAB/FM antenna, b Ethernet cable, c Power cord (main unit), d Power cord (for subwoofer)
> Install
2
4
c
> Initial Setup
> Playback
b
d
d
Supplementary Information | Advanced Setup | Others
Antenna Hookup
Connect the supplied DAB/FM antenna to the ANTENNA
DAB/FM terminal. Make sure the plug is pushed in all the
way, then fix in place by turning the nut to the right. Use a
tack or similar to fix the antenna to a wall.
Network Hookup
Connect this unit to the network using wired LAN or Wi-Fi
(wireless LAN). You can enjoy network features such as
internet radio by connecting the unit to the network. If you
connect by wired LAN, connect with an Ethernet cable to the
ETHERNET port as shown in the illustration. To connect by
Wi-Fi, then after selecting "Wireless" in "2. Network
Connection" (
P17) in Initial Setup, select the desired
setting method and follow the onscreen instructions to
configure the connection.
Power Cord Hookup
Connect the power cord of this unit and subwoofer after all
other connections are completed.
E
N
15
Publicité
Table des Matières
