Inspection & Maintenance; Maintaining Weather Resistance; Recommended Tools - Bose Professional ArenaMatch AMU108 Guide D'installation

Table des Matières

Publicité

PRO.BOSE.COM
Inspection & Maintenance
WARNING: The loudspeaker and all mounting components must be inspected annually by a qualified
professional who is trained and certified in suspending loudspeaker systems. All rigging parts and
components used in the suspension of the loudspeaker system should be visually inspected for signs
of cracking, bending, water damage, corrosion, de-lamination, or any other condition that could
compromise the system's integrity and create a dangerous falling hazard.

Maintaining Weather Resistance

ArenaMatch Utility loudspeakers are rated for direct-exposure outdoor installations. To maintain weather
resistance, please observe the following precautions:
1.
Before, during, and after installation, check the surface of the loudspeaker enclosure to ensure that the
factory-applied, weather-resistant coating has not been damaged.
2. During install, angle the loudspeaker at least 5° downward to reduce the potential of rain compromising the
performance of the loudspeaker.
3. All mounting holes must be sealed off with steel screws (included with applicable accessories) or the
included plastic plugs (pre-installed).
4. The gland nut that secures the loudspeaker cable is factory sealed. Do not remove the gland nut or the
weather-resistant seal will be broken.
5. The loudspeaker is rated for direct-exposure installations, which means the grille is designed to withstand
normal and wind-driven rain. The grille is not designed to withstand direct spraying of water from a hose or
pressure washer.
CAUTION: If the above instructions are not observed, the weather-resistant integrity of your
ArenaMatch Utility loudspeaker could be compromised.
For fire and evacuation notification applications, environmental rated to IP33C per EN 54-24.
For general purpose audio installation applications, environmental rated to IP55 per EN60529.

Recommended Tools

The following tools are recommended for assembly of an ArenaMatch Utility loudspeaker system:
Flathead screwdriver
#2 Phillips-head screwdriver
10-millimeter socket or wrench
5-millimeter hex key
T3 square drive (included)
Installation Guide • ArenaMatch Utility
Overview
English • 11

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Arenamatch amu105Arenamatch amu206Arenamatch amu208Arenamatch utility amu108Arenamatch utility amu105Arenamatch utility amu206 ... Afficher tout

Table des Matières