Customer Service - Kapsys SmartVision 2 Guide De Démarrage Rapide

Masquer les pouces Voir aussi pour SmartVision 2:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
Short-circuits of the battery or use of the battery in another device
than SmatVision2
Use of accessories or connectors not supplied by the manufac-
turer.
Damage resulting to an attempted repair done by someone not
authorized by the manufacturer
It is recommended that you perform one or more backups of the data
saved in your product. The dealer cannot be held responsible for the
loss of this data because of a malfunction, repair or replacement of
the product.
Any malfunctions related to network services and / or cellular system
cannot be guaranteed. The phone network provider or the internet ser-
vice provider will need to be contacted directly for assistance.
4. ABOUT SPECIFIC ENERGY ABSORPTION RATE*
Your SmartVision2 by KAPSYS is a radio transmitter/receiver. It was
designed and manufactured to comply with the radiofrequency (RF)
exposure thresholds recommended by the European Union.
This device meets the EU requirements (1999/519/EC) on the limita-
tion of exposure of the general public to electromagnetic fields by way
of health protection. The unit of measurement for European council's
recommended limit for mobile telephones is the "Specific Absorption
Rate" (SAR). This SAR limit is 2.0 W/kg averaged over 10 g of body
tissue. This device meets the requirements of the International Com-
mission on Non-Ionizing Radiation Protection (ICNIRP) and European
Standard EN 62209-1 / EN 62209-2 / NF EN 50566 for mobile radio
devices.
For body-worm operation, this phone has been tested use with acces-
sories that contain no metal and that position the handset a minimum of
1.5 cm from the body. Use of other accessories may not ensure com-
pliance with RF exposure. If you do not use a body-worm accessory
and are not holding the phone at the ear, position the handset a mini-
mum of 1.5 cm from your body when phone is switched on.
During use, the actual SAR level is usually much lower than the maxi-
mum value. In general, the closer you are to the base station, the lower
the transmission output of your mobile telephone. To reduce exposure
to RF energy, use a hands-free accessory or other similar option to
keep the device away from your head and your body.
The highest SAR value of this device is listed below:
Head: 0.178 W/kg (averaged over 10g of body tissue)
Body : 1.148 W/kg (averaged over 10g of body tissue)

5. CUSTOMER SERVICE

For more details, please contact your vendor's Customer Service or
send us a mail to: Service Clients
KAPSYS – 694 avenue du Docteur Maurice Donat 06250 MOUGINS
SOPHIA ANTIPOLIS, France.
You can also visit our website: www.kapsys.com.

Publicité

Table des Matières
loading

Table des Matières