Changing The "Picture" Setting - Sony Trinitron Wega KV-DB34 Mode D'emploi

x Changing the "Picture" setting
The "Picture" menu allows you to adjust the picture settings.
1
Press WEGA GATE and select "Settings".
2
Make sure the "Picture" icon (
selected, then press
3
Press V or v to select the desired item (e.g., "DRC-MF"), then press
Select
"DRC-MF"
"Picture Mode"
"Intelligent Picture"
"NR"
(Noise Reduction)
* You can adjust the setting to your personal preference in the "Picture Adjustment"
option only when the "Custom" mode is selected (see page 19).
Notes
• The DRC-MF mode is not selectable when "Game Mode" mode is turned "On". The mode is
not available for HD (high-definition) and progressive input signals.
• "NR" is not selectable when receiving signals through the
(component video input) terminals.
The DRC-MF logo (
Corporation.
18
Menu Adjustment
) is
.
To
choose either "DRC1250" (for high density pictures), "DRC100"
(reduce flicker on the screen) or "Progressive" (reduce jitter of
any small areas or scanning lines on the screen).
choose either "Vivid", "Standard" or "Custom"* (see page 11).
optimize picture quality.
Press V or v to select "On", then press
To cancel, select "Off", then press
optimize overall picture sharpness to reduce noise.
Choose either "High", "Low" or "Off".
) and "DRC-MF" are trademarks of Sony
Picture
DRC-MF: DRC1250
Picture Mode: Vivid
Picture Adjustment
Intelligent Picture:
NR:
Low
Select Confirm
.
.
(S video input) or
On
End
.