Cleaning And Maintenance; Technical Specifications - Toolland TM76073 Mode D'emploi

5. Avoid the water in the water tank to evaporate completely. You can use the appliance for around 50
minutes when the water tank is filled with 3L of water. Check regularly the water level of the water tank.
6. If the water is missing in the water tank, an automatic mechanism will interrupts the power supply. It will
restore the power supply after filling up.
7.

Cleaning and Maintenance

The machine does not require any special maintenance.
• After every use clean out the water tank to avoid lime scale.
• Do not use detergents, acids or flammables products to clean the appliance.
• Always unplug the appliance and wait till it is cooled down before cleaning.
8.

Technical Specifications

power supply 220-240 VAC 50 Hz
power 1850-2200 W
tank capacity 4.5 L
working time 70 min
steam plate size 28 x 20 cm
tube length 3 m
power cord 3 m H05RN-F 3G1.0mm²
Use this device with original accessories only. Velleman nv cannot be held responsible in the event
of damage or injury resulting from (incorrect) use of this device.
For more info concerning this product and the latest version of this manual, please visit our website
www.toolland.eu.
The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this
manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the
prior written consent of the copyright holder.
V. 05 – 19/07/2018
TM76073
5 ©Velleman nv