Atlantic TIMELIS CLASSIQUE Notice D'utilisation Et D'installation page 19

3/ Fastening and locking the towel-drying radiator to the wall
5
Screw the supports
onto the tubes wi-
thout blocking them.
Check their position
by putting them with
the towel-drying ra-
diator into
sheaths.
Once you found the
right position, lock
the screws for each
contact.
4/ Fitting and removing the hanger
1
Fit the base with the screw be-
hind the towel-drying radiator
in the wanted position.
2
Screw the hanger onto the
frame and tighten gently.
the
6
Fit the towel-
drying radiator
on the wall in
the sheaths.
Screw down
each of the
locking blocks.
Put the caps
on the end of
the supports.
• •
18