Installation; 1/ Preparing To Install The Heated Towel Rail - Atlantic TIMELIS CLASSIQUE Notice D'utilisation Et D'installation

1/ Preparing to install the heated towel rail

Location of the device
- This device was designed to be installed in re-
sidential premises. In any other case, please
call your distributor.
- Installation must comply with the standards
currently enforced in the country of use.
- Locate the heater within minimum distances
from obstacles.
Do not install the device :
• In a draft likely to affect its control
(under centralised mechanical ventilation,
etc...).
• Under a fixed mains outlet.
• Inside zones 0 and 1 in bathrooms.
The device has to be installed so that switches and other
controls cannot be touched by a person in the bath or
shower, except in the UK where IEE Regulations 701.512.2
and 701.512.3 apply. These allow the use of IP24 rated
products and their integral controls in Zone 2 and ouside
zones.

Installation

15
GB
150 mm mini
150 mm mini
200 mm mini