Panasonic NE-2153-2 Mode D'emploi page 26

How to Operate NE-2153-2/NE-1653
Oven Lamp blinks at the end of heating cycle
Adjusting Oven Lamp brightness during cooking
To turn the blinking Oven Lamp ON at the end of heating cycle
5. Within 3 seconds after touching Prog Pad at Step 4, touch Start Pad.
"PROG" will start to blink. The previously set Oven Lamp blink settings are displayed.
6. Touch Start Pad.
Note: "oFF" "on"
7. Touch Prog Pad.
"PROG" will stop blinking, and the Oven Lamp blink settings will appear for
3 seconds. Then "0" will appear.
To proceed to Step 8, touch Start Pad before "0" is displayed after Step 7.
To decrease brightness of the inner cavity during cooking
8. Within 3 seconds after touching Prog Pad at Step 7, touch Start Pad.
"PROG" will start to blink. The previously set Oven Lamp reduction settings are
displayed.
9. Touch Start Pad.
Note: "oFF"
"on"
10. Touch Prog Pad.
"PROG" will stop blinking, and the Oven Lamp reduction settings will appear for
3 seconds. Then "0" will appear.
"oFF" is repeated each time the Pad is touched.
"oFF" is repeated each time the Pad is touched.
- 26 -