General Guidelines - Velleman CAMIP15 Mode D'emploi

CAMIP15
DO NOT disassemble or open the cover. There are disassemble or open the cover. There are
no user-serviceable parts inside the device. Refer
to an authorized dealer for service and/or spare
parts.

General Guidelines

Refer to the Velleman® Service and Quality Warranty
on the last pages of this manual.
• Keep this device away from dust and extreme heat.
• Protect this device from shocks and abuse. Avoid brute
force when operating the device.
• Familiarise yourself with the functions of the device
before actually using it.
• All modifications of the device are forbidden for safety
reasons.
• Only use the device for its intended purpose. Using the
device in an unauthorised way will void the warranty.
• Damage caused by disregard of certain guidelines in this
Damage caused by disregard of certain guidelines in this
manual is not covered by the warranty and the dealer will manual is not covered by the warranty and the dealer will
not accept responsibility for any ensuing defects or
problems.
• DO NOT use this product to violate privacy laws or
perform other illegal activities.
Installation
(See fig. 1)
1. Unscrew the base of the camera and remove the metal Unscrew the base of the camera and remove the metal
plate.
2. Fasten the mounting bracket to the wall with the
included screws and anchors.
3. Reattach the base cover and screw the stand back onto and screw the stand back onto
the mounting bracket.
4. Adjust the viewing angle of the camera.
Caution: Do not aim the camera at the sun or other
extremely bright objects.
V. 02 – 14/05/2014 15
e device. Refer
©Velleman nv ©Velleman nv