Activities During Operation; Clipping; Changing The Battery; Changing The Clipperhead - Heiniger Saphir Mode D'emploi

6.2

Activities during operation

6.2.1 Clipping

1. Fix and calm the animal sufficiently before clipping.
2. Switch on the clipper already in the field of vision of the animal.
3. Approach to the animal from ahead.
4. During clipping, look at the behaviour of the animal.
6.2.2 Changing the batteries
When the battery is unloaded, the clipper is turned off by a protective circuit.
fig. 18
fig. 19

6.2.3 Changing the clipperhead

fig. 20
12
1. Move the switch to position "0" (fig.4).
2. Push the battery interlock (2) on both
sides inward and pull the battery (1)
out of the clipper.
3. Fit the loaded battery (1) in the clipper
(2), till the battery interlock is engaged
on both sides.
1. Move the switch to position "0" (fig. 4).
2. Push the clipperhead interlock.
Instruction Manual / Small animal clipper