Table Des Matières; Meanings Of Symbols - Hitachi Koki CS 33EDT Mode D'emploi

English

MEANINGS OF SYMBOLS

NOTE: Some units do not carry them.
Symbols
WARNING
The following show symbols used for the machine. Be sure that you understand their meaning before use.
It is important that you read, fully understand and
observe the following safety precautions and warnings.
Careless or improper use of the unit may cause serious
or fatal injury.
Read, understand and follow all warnings and
instructions in this manual and on the unit.
Always wear eye, head and ear protectors when using
this unit.
Warning, kickback danger. Be careful of possible
sudden and accidental upward and/or backward motion
of the guide bar.
One-handed usage not permitted. While cutting, hold
saw fi rmly with both hands with thumb fi rmly locked
around front handle.
Chain brake
Choke - Run position (Open)
Choke - Choked position (Closed)
On/Start
Contents
WHAT IS WHAT? .............................................................................. 3
WARNINGS AND SAFETY INSTRUCTIONS .................................... 3
SPECIFICATIONS ............................................................................. 5
ASSEMBLY PROCEDURES ............................................................. 6
OPERATING PROCEDURES ............................................................ 7
MAINTENANCE .............................................................................. 11
Parts breakdown
2
Off /Stop
Emergency stop
Fuel and oil mixture
Chain oil fi ll
Carburetor adjustment - Idle speed
Carburetor adjustment - Low speed mixture
Carburetor adjustment - High speed mixture
Hot surface