Télécharger Imprimer la page

Using The Accessories - Miele CarCare Mode D'emploi

Masquer les pouces Voir aussi pour CarCare:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
en
Before using the CarCare vacuum
cleaner accessory set it is essential
to read and observe the Warning and
Safety instructions in the Operating
instructions for your vacuum cleaner.
The CarCare vacuum cleaner
accessory set is designed for use with
Miele vacuum cleaners.
The accessories can be used with the
following Miele vacuum cleaners:
– S 500 – S 557
– S 600 – S 657
– S 700 – S 757 / S 760 – S 768
– S 800 – S 857
– S 2000 – S 2999
– S 4000 – S 4999
– S 5000 – S 5799
– S 6000 – S 6799
– S 8000 – S 8799

Using the accessories

(see illustrations on pages 2 and 3)
a Flexible crevice nozzle
For accessing awkward to reach areas.
b Flexible extension hose
For extending the suction hose by
approx. 1.5 m.
c Multi-purpose brush
For vacuuming the dashboard and
glove box.
d Hand-held compact turbobrush
For vacuuming car seats and
carpets in the floor wells and boot.
It is important to observe the
manufacturer's cleaning and care
instructions for the surface being
vacuumed.
10
Maintenance and care of the
hand-held compact turbobrush
,
Always disconnect the vacuum
cleaner from the electrical supply for
maintenance and cleaning of the
compact turbobrush. Switch off at
the wall socket and remove the plug.
Removing threads and hairs
^ Cut any threads or hairs that have
become entangled in the roller brush
with a pair of scissors. There is a
groove along the roller to help you.
Then run the vacuum cleaner to
vacuum up the bits.
For more obstinate tangles or
blockages inside the hand-held
turbobrush, the cover can be opened.
Any large particles inside it can then be
easily removed.
^ Press the release button and remove
the cover.
^ Remove any soiling from the cavity
and from the roller brush.
^ Replace the cover.
Changing the threads lifters
Check the thread lifters on the suction
inlet from time to time and replace them
if the pile has worn down.
^ Using a knife or similar object lever
the thread lifters out of their holders.
See positions marked red at the
sides.
^ Fit new thread lifters.

Publicité

loading