Publicité
Les langues disponibles
Les langues disponibles
G
Assembly in accordance with
the sequence of figures.
Notes:
.Unreeling is easier if the hose
is taken up loosely in layers
by winding in a clockwise
direction (figure P).
.Store the Hose Trolley pro-
tected from frost before the
first frost occurs.
Figure D:
Use 4 oval head screws, M 5 x 35,
and 4 nuts, M 5.
Figure E:
Use 2 sheet metal screws,
4.2 x 16.
Figure F:
Use 2 sheet metal screws,
4.2 x 19.
Note : Please ensure that the
wheels are mounted with the
tread side facing outwards
(detail illustration F). A wheel
not mounted correctly will rub.
Figure I:
Mount the bearing shells and
fasten with 2 sheet metal screws,
4.2 x 19.
Attention ! Screw in the screws
to their limit.
Figure L:
Note: Insert the threaded tap
connector so that the opening
of this is between the drum
cross arms. Only this position
enables straightforward fitting
of the hose.
Figure P 1:
Working position of the Metal
Hose Trolley.
We expressly point out that, in
accordance with the product
liability law, we are not liable
for any damage caused by our
units if it is due to improper
repair or if parts exchanged are
not original GARDENA parts
or parts approved by us, and if
the repairs were not carried out
by a GARDENA Service Centre
or an authorised specialist.
The same applies to spare parts
and accessories.
Publicité
