KNAUS Calira Bord Control 2005 Mode D'emploi page 25

Battery voltage display
Buttons (7 and 8) are for enquiring into voltage states of Battery 2 (supply
battery, Button 7) and Battery 1 (starter battery, Button 8). The voltage state is
shown in the display panel (9) in panels.
Display panel What it means
1 and 2 red Battery must be charged.
3 and 4 yellow Battery almost discharged
5 to 10 green Battery is adequately charged
The LED in the battery symbol via button (7) always illuminates when the
supply battery is being charged under mains or running operations. The LED
in the battery symbol via button (8) illuminates when the starter battery is
being charged. This means when either the motor is running or Batteries 1 and
2 are connected in parallel.
Level indicator
The level display (10) indicates - in yellow panels - the actual level of the fresh
and waste water tanks. The enquiry is done by pressing button (12) for the
fresh water tank or button (12) for the waste water tank. Fitted contact sensors
establish the level in the waste water tank in 1/4 steps. There is continuous
measurement in the fresh water tank.
Display What it means
Area 1 to 3 Level - 1/4 of the tank capacity
Area 1 to 5 Level - 1/2 of the tank capacity
Area 1 to 7 Level - 3/4 of the tank capacity
Area 1 to 10 Level - 1/1 of the tank capacity
Lerchenfeldstr. 9 87600 Kaufbeuren Phone: +49 (0)8341 9764-0 Fax: +49 (0)8341 67806
25