Philips PT848 Mode D'emploi page 14

ENGLISH
14
10 Insert the lug of the shaving unit into the slot in the top of the shaver.
Then close the shaving unit.
Note: If the shaving unit does not close smoothly, check if you have inserted
the shaving heads properly and if the retaining frame is locked.
11 Shake off excess water.
Be careful not to hit the shaving unit against anything while shaking
off excess water.
Never dry the shaving unit and the hair chamber with a towel or tissue,
as this may damage the shaving heads and the coupling spindles.
12 Open the shaving unit again and leave it open to let the shaver
dry completely.
Cleaning the trimmer under the tap
Clean the trimmer every time you have used it.
1 Switch off the shaver and disconnect it from the mains.
2 Push the trimmer slide downwards to open the trimmer.
3 Clean the trimmer under the tap.
4 Close the trimmer (' click').
Tip: For optimal trimming performance, lubricate the trimmer teeth with a
drop of sewing machine oil every six months.