Settings Menu Content - Panasonic TX-43JX600E Mode D'emploi

Settings Menu Content

Picture Menu Content
Mode
Contrast
Brightness
Sharpness
Colour
Energy Saving
Backlight
Picture Zoom
Picture Shift
Advanced Settings
Dynamic Contrast
Colour Temp
White Point
Vivid Blue
Vivid Dimming
Noise Reduction
Film Mode
MEMC
MEMC Demo
Skin Tone
Colour Shift
Colour Tuner
Gamut Mapping
You can change the picture mode to suit your preference or requirements. Picture mode
can be set to one of these options: Cinema, Game, Sports, Dynamic and Natural.
Note: Available options may differ depending on the input source.
Dolby Vision Modes: If Dolby Vision content is detected Dolby Vision Dark and Dolby
Vision Bright picture mode options will be available instead of Cinema and Natural
modes.
Adjusts the light and dark values on the screen.
Adjusts the brightness values on the screen.
Sets the sharpness value for the objects displayed on the screen.
Sets the colour value, adjusting the colours.
For setting the Energy Saving to Custom, Minimum, Medium, Maximum, Auto,
Screen Off or Off.
Note: Available options may differ depending on the selected Mode.
This setting controls the backlight level. This option
Saving setting) will be avai̇ lable if the Energy Saving is set to Custom. Highlight and
use Left/Right directional buttons to set.
Sets the desired image size format.
This option (will be located under the Picture Zoom setting)
on the Picture Zoom setting. Highlight and press OK, then use directional buttons to
shift the picture upwards or downwards.
You can change the dynamic contrast ratio to desired value.
Sets the desired colour temperature value. Cool, Normal, Warm and Custom options
are available.
If the Colour Temp option is set as Custom, this setting will be available
under the Colour Temp
pressing Left or Right buttons.
White colour enhancement function that makes white colour more cooler in order to
make more bright picture. Set as On to enable.
Low, Medium, High and Off options are available. While Vivid Dimming is active, it
will enhance contrast locally for each defined zone.
Low, Medium, High and Off options are available. If the signal is weak and the picture
is noisy, use the Noise Reduction setting to reduce the amount of noise.
Films are recorded at a different number of frames per second to normal television
programmes. Turn this
motion scenes clearly.
Press left/right buttons to set
active, it will optimise the TV's video settings for motional images to acquire a better
quality and readability.
MEMC
option is set to Low, Medium or High, this option will be available. Press
When
OK button to activate the demo mode. While demo mode is active, the screen will be
divided into two sections, one displaying the
normal settings for TV screen. Press OK button again to cancel.
Skin tone can be changed between -5 and 5.
Adjust the desired colour tone.
Opens colour tuner settings. Set the Colour Tuner as Enabled to adjust the Hue, Colour
and Brightness values manually.
You can use this option to set the range of colours displayed on your TV screen. When
set as On, colours are set according to the source signal. When set as Off, the TV's
maximum colour capacity is used by default (recommended option).
Note: This option may not be available depending on the TV model and its features.
English - 19 -
setting). Increase the 'warmth' or 'coolness' of the picture by
feature to Auto
when you are watching films to see the fast
MEMC
to Low, Medium, High or Off. While
MEMC
(will be located under the Energy
may be available depending
(will be located
activity, the other displaying the
MEMC
is