Mitsubishi Electric Mr.SLIM SEZ-KA35VA Manuel D'utilisation page 7

2. Operation
2 4
Timer Setting
Hr ON
AFTER
SIMPLE
5 6
TIMER
˚C
˚C
3
Action (On or Off)
* "— —" is displayed if there
1
is no setting.
Timer Setting
Hr ON
AFTER OFF
1
SIMPLE
7
˚C
SIMPLE
7
Hr ON
AFTER
˚C
SIMPLE
s s s s s How to Set the Simple Timer
1. Be sure that you are at a standard control screen, and that the sim-
ple timer indicator is visible in the display (at 1).
When something other than the Simple Timer is displayed, set it to
SIMPLE TIMER using the function selection of remote controller (see
2.10. [4]–3 (3)).
2. Press the Timer Menu button B, so that the "Set Up" appears on the
screen (at 2). (Note that each press of the button toggles the display
between "Set Up" and "Monitor".)
3. Press the ON/OFF button 1 to display the current ON or OFF simple
timer setting. Press the button once to display the time remaining to
ON, and then again to display the time remaining to OFF. (The ON/
OFF indication appears at 3).
• "ON" timer: The air conditioner will start operation when the
specified number of hours has elapsed.
• "OFF" timer: The air conditioner will stop operation when the
specified number of hours has elapsed.
4. With "ON" or "OFF" showing at 3: Press the appropriate Set Time
button A as necessary to set the hours to ON (if "ON" is displayed)
or the hours to OFF (if "OFF" is displayed) at 4.
• Available Range: 1 to 72 hours
5. To set both the ON and OFF times, repeat Steps 3 and 4.
* Note that ON and OFF times cannot be set to the same value.
6. To clear the current ON or OFF setting: Display the ON or OFF set-
ting (see step 3) and then press the Check (Clear) button 0 so that
the time setting clears to "—" at 4. (If you want to use only an ON
setting or only an OFF setting, be sure that the setting you do not
wish to use is shown as "—".)
7. After completing steps 3 to 6 above, press the Filter
lock in the value.
Note:
Your new settings will be cancelled if you press the Mode (Return) button
2 before pressing the Filter
8. Press the Mode (Return) button 2 to return to the standard control screen.
9. Press the Timer On/Off button 9 to start the timer countdown. When
the timer is running, the timer value is visible on the display. Be sure
that the timer value is visible and appropriate.
s s s s s Viewing the Current Simple Timer Settings
1. Be sure that the simple timer indicator is visible on the screen (at 1).
2. Press the Timer Menu button B, so that the "Monitor" appears on the
screen (at 5).
• If the ON or OFF simple timer is running, the current timer value
will appear at 6.
• If ON and OFF values have both been set, the two values appear
alternately.
3. Press the Mode (Return) button 2 to close the monitor display and
return to the standard control screen.
s s s s s To Turn Off the Simple Timer...
Press the Timer On/Off button 9 so that the timer setting no longer ap-
pears on the screen (at 7).
s s s s s To Turn On the Simple Timer...
Press the Timer On/Off button 9 so that the timer setting becomes visible
at 7.
button 4 to
button 4.
7