IBC SOLAR ServeMaster 1600 MV Manuel D'utilisateur page 9

2. Function Description
Menu Structure B- Continued
Display Functions
Total drt. Temp. - Press OK to view
2
↳
Total drt. Grid | 0h 00 min
Power-down time | 00600 seconds
Code numbers | PRESS OK to view
↳
Serial numbers | Press OK to view
↳
Table 2.4: Overview Menu Structure B
*) The PV2 and PV3 menus are only displayed in inverters equipped with two or three inputs.
In menu section A the display will continue to show the menu point last chosen by the user.
In menu B the display automatically switches to menu A when there has been no keyboard activity
for 3 minutes.
If the inverter is off grid and no keys have been pressed for a certain number of seconds, the
display will automatically switch to the operation mode display.
If the inverter is on grid and there has been no keyboard activity for 3 minutes, the display au-
tomatically switches to the display Production today. When the PV configuration test initiates and
terminates the display temporarily changes to menu B to show the state of the PV configuration
test.
If the inverter is disconnected from the grid because of a failure, the red LED will start flashing,
and the display automatically switches to menu B, where the event is shown.
8
Description
Total Derating Temperature. Shows the total amount of time the inverter
has derated due to high temperature.
Submenu
DC1 Derating Temperature. Shows the amount of time the inverter has
DC1 derate temp. | 3h 35m
derated due to high temperature.
DC2 Derating Temperature. Shows the amount of time the inverter has
DC2 derate temp. | 3h 35m
derated due to high temperature.
DC3 Derating Temperature. Shows the amount of time the inverter has
DC3 derate temp. | 3h 35m
derated due to high temperature.
Total Derating Grid. Shows the amount of time the inverter has derated
due to unstable grid conditions.
Time before inverter goes into 'OFF' mode when no solar power is available.
Press OK to access submenu for recorded events.
Submenu
Inverter code no. | Indicates inverter product code.
AC code number | C0070105602 Indicates AC module product code.
DC1 code number | C0070105402 Indicates DC1 module product code.
DC2 code number | C0070105402 Indicates DC2* module product code.
DC3 code number | C0070105402 Indicates DC3* module product code.
Press OK to go to submenu for recorded events.
Submenu
Inverter SN: | Indicates inverter serial number.
AC SN: | 117500C0408 Indicates AC module serial number.
DC1 SN: | 642800C0808 Indicates DC1 module serial number.
DC2 SN: | 642800C0808 Indicates DC2* module serial number.
DC3 SN: | 642800C0808 Indicates DC3* module serial number.
L00410346-04