Leds; Display; Overview Menu Section A - IBC SOLAR ServeMaster 1600 MV Manuel D'utilisateur

2. Function Description

2.1.3. LEDs

The green LED indicators show the production in percentage of the nominal inverter power rating.
The leftmost green LED is always lit when the inverter is connected to the grid. While connecting
2
to grid both the red LED and the leftmost green LED will be on. When the inverter is off grid, the
red LED to the left is lit to indicate that the inverter is in standby mode. No green LEDs are lit. If
no LED's are on the inverter is off. If the inverter is forced into standby mode because of an event
in the inverter or the peripheral connections, e.g. disconnection from the grid, the red LED starts
flashing.
For a description of events, please refer to the section on

2.1.4. Display

Through the integrated display on the inverter front, the user has access to all information about
the PV system and the inverter. When the inverter is in OFF mode (at night), the inverter can be
activated by pressing the left button (ESC).
Illustration 2.2: Display

2.1.5. Overview Menu Section A

The table below gives an overview of the menu structure. The values shown are only intended as
examples of display texts. The display text (shown in the first column Display Functions ) is divided
between 2 lines, with 16 characters available per line. The line division is illustrated with the symbol
|.
Menu Structure A
Display Functions
Output power | 0 W
Inverter name |
Total production | 22.991 kWh
Total operating time | 00028h 57m 02s Total operating time (time with power on) displayed in hours, minutes and seconds.
Production today | 19637 Wh
Go to menu B
Table 2.2: Overview Menu Structure A
6
Troubleshooting .
ESC
Up
▲
Down Scrolls forward to the next menu display
▼
Enter New menu level or changing of settings
OK
The parameters shown in the display refer to
internally measured voltages and currents.
The parameters shown may deviate.
The display information is organised in a menu
structure divided into two sections: A and B
Section A: Contains information about the in-
verter and PV system performance.
Section B: Displays all measurement values
and user settings.
Description
Current output power in watt.
Use Service Tool to enter inverter name. If the inverter name is undefined this menu
is skipped.
Total energy production in kWh since first inverter start-up.
Energy production today in Wh.
Jumps to menu level B when OK is pressed.
L00410346-04
Goes one step backwards/up in the menu
structure
Scrolls back to the previous menu display