Durabase LE32F265X3C Mode D'emploi page 53

Connectivity
Wired Connectivity
To Connect to a Wired Network
• You must have a modem/router connected to an
active broadband connection.
• Ensure that Nero Media Home software is installed
to your PC (for DLNA function). See "Nero Media
Home Installation" section.
• Connect your PC to your modem/router. This can
be a wired or wireless connection.
• Connect your TV to your modem/router via an
ethernet cable. There is a LAN port at the rear
(back) of your TV.
Broadband ISP
connection
LAN (ethernet)
cable
LAN input on the rear
side of the TV
• To access and play shared iles, you must select the
Media Browser. Press the Menu button and select
Media Browser. Press OK to continue. Select the
desired ile type and press OK. You must always
use the Media Browser screen to access and play
shared network iles.
• PC/HDD/Media Player or any other devices that are
DLNA 1.5 compatible should be used with a wired
connection for higher playback quality.
To conigure wired settings please refer to the
Network Settings section in the Settings menu.
• You might be able to connect your TV to your LAN
depending on your network's coniguration. In such
a case, use an ethernet cable to connect your TV
directly to the network wall outlet.
LAN input on the rear
side of the TV
Coniguring Wired Device Settings
Network Type
The Network type can be selected as Wired or Wireless
Device, in accordance with the active connection to the
TV set. Select this as Wired Device if you are connecting
via an ethernet.
Coniguration Status
This section displays the status of the connection.
IP Address
If an active connection is available, the IP address will
be displayed on this section. If you want to conigure an
IP address preferences, press the Green button and
switch to the advanced mode.
Coniguring Wired Network Settings in
Advanced Mode
After pressing the Green button, the advanced mode
will be available. While in advanced mode, press the
Red button to edit settings. When inished, press OK
to save, Press Return/Back to exit.
Wireless Connectivity
To Connect to a Wireless Network
The TV cannot connect to the networks with a hidden
SSID. To make your modem's SSID visible, you should
change your SSID settings via the modem's software.
To Connect to a wireless LAN, you should perform
the following steps:
1. Ensure that Nero Media Home software is
2. To conigure your wireless settings please refer
A Wireless-N router (IEEE 802.11a/b/g/n) with
simultaneous 2.4 and 5 GHz bands is designed to
increase bandwidth. These are optimized for smoother
and faster HD video streaming, ile transfers and
wireless gaming.
network wall
• Use a LAN connection for quicker file sharing
socket
between other devices like computers.
• The frequency and channel differ depending on the area.
• The transmission speed differs depending on the
distance and number of obstructions between the
transmission products, the coniguration of these
products, the radio wave conditions, the line trafic
and the products that you use. The transmission may
also be cut off or may get disconnected depending
English - 52 -
installed to your PC (for DLNA function).
to the Network settings section in this manual.
Broadband
ISP
connection
W i rel e ss LAN
adap t or
U S B inpu t
on th e rear l e ft
si
de of th e TV