Durabase LE32F265X3C Mode D'emploi page 47

Audio Description
Auto TV Off
Standby Search
(Optional)
Store Mode
Media Renderer
Power Up Mode
Biss Key
Virtual Remote
CEC
FollowMe TV
FollowMe TV to DMR
Install and Retune Menu Contents
Automatic Channel
Scan (Retune)
Manual Channel
Scan
Network Channel
Scan
Analogue Fine Tune
First Time
Installation
Clear Service List
A norration track will be played for the blind or visually impaired audience. This
feature is available only if the broadcaster supports it.
Note: Audio description sound feature is not available in recording or time shifting
mode.
Sets the desired time for the TV to automatically go into standby mode when not
being operated.
Your TV will search for new or missing channels while in standby. Any new found
broadcasts will be shown.
Select this mode for store display purposes. Whilst Store Mode is enabled, some
items in the TV menu may not be available.
Media renderer feature allows you to share iles stored on your smartphone or tablet
pc. If you have a DLNA compatible smartphone or tablet pc and the appropriate
software is installed, you can share/play photos on your TV. See instructions of your
sharing software for more information. Media renderer mode will not be available
with internet portal feature.
This setting conigures the power up mode preference.
Biss is a satellite signal scrambling system that is used for some broadcasts. If
you need to enter BISS key on a broadcast, you can use Biss Key setting located
in the Other Settings menu. Highlight Biss Key and press OK to enter keys on
the desired broadcast.
Enable or disable the virtual remote feature.
With this setting you can enable and disable CEC functionality completely.
Press Left or Right button to enable or disable the feature.
Enable or disable this feature.
Enable or disable this feature.
Displays automatic tuning options. Digital Aerial: Searches and stores aerial
DVB stations. Digital Cable: Searches and stores cable DVB stations. Analogue:
Searches and stores analogue stations. Digital Aerial & Analogue: Searches and
stores aerial DVB and analogue stations. Digital Cable & Analogue: Searches
and stores cable DVB and analogue stations. Satellite: Searches and stores
satellite stations.
This feature can be used for direct broadcast entry.
Searches for the linked channels in the broadcast system.
You can use this setting for ine tuning analogue channels. This feature is not
available if no analogue channels are stored.
Deletes all stored channels and settings, resets TV to factory settings.
(*) This setting is visible only when the Country option is set to Denmark, Sweden,
Norway or Finland. Use this setting to clear channels stored.
English - 46 -