Durabase LE32F265X3C Mode D'emploi page 44

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CEC and CEC RC Passthrough
This function allows to control the CEC-enabled
devices, that are connected through HDMI ports by
using the remote control of the TV.
The CEC option in the Other Settings menu under
Settings menu should be set as Enabled at irst.
Press the Source button and select the HDMI input
of the connected CEC device from the Source List
menu. When new CEC source device is connected,
it will be listed in source menu with its own name
instead of the connected HDMI ports name(DVD
Player, Recorder 1 etc.).
The TV remote is automatically able to perform the
main functions after the connected HDMI source
has been selected.
To terminate this operation and control the TV
via the remote again, press and hold the "0-Zero"
button on the remote control for 3 seconds. Or press
Q.Menu button on the remote, highlight the CEC
RC Passthrough and set as Off by pressing Left
or Right button. This feature can also be enabled or
disabled under the Settings/Other Settings menu.
The TV supports also ARC(Audio Return Channel)
feature. This feature is an audio link meant to
replace other cables between the TV and the audio
system (A/V receiver or speaker system).
When ARC is active, TV does not mute its other
audio outputs automatically. So you need to
decrease TV volume to zero manually, if you want to
hear audio from connected audio device only (same
as other optical or co-axial digital audio outputs).
If you want to change connected device's volume
level, you should select that device from the source
list. In that case volume control keys are directed to
connected audio device.
English - 43 -

Publicité

Table des Matières
loading

Table des Matières