OUTILS & MATÉRIAUX REQUIS
Ruban à mesurer
Niveau
Équerre
Crayon
Scie emporte-pièce
Couteau utilitaire
Ruban masque 2''
Pistolet à calfeutrage
Truelle à cannelures 1/4'' pour étaler l'adhésif
Un tube de 304 ml de scellant latex/acrylique
pour salle de bain
Quatre tubes de 310 ml d'adhésif recommandé
pour les contours de bain et de douche*. Pour les
contours de 73'' et 80'' de hauteur, nous vous
recommandons cinq tubes d'adhésif.
* Marques recommandées: No More Nails
encadrement de baignoire (LePage), et Liquid
2
Nails
, contour de bain (Liquid Nails).
L'utilisation de PL700
recommandée.
IMPORTANT
Utilisez uniquement un adhésif recommandé pour le polystyrène de 45 millièmes d'épaisseur (maximum)
qui peut s'appliquer à l'aide d'une truelle. Nous vous recommandons d'utiliser un adhésif de couleur
blanche ou claire puisque l'adhésif de couleur brunâtre sera possiblement visible à travers les panneaux.
Veuillez suivre les instructions du fabricant de l'adhésif pour les mises en garde et le mode d'emploi.
Technoform ne se tiendra aucunement responsable si le consommateur avisé pose le produit à l'aide
d'un adhésif 1) qui n'est pas recommandé pour le polystyrène 45 millièmes d'épaisseur maximum (et qui
pourrait donc potentiellement contenir trop de solvant, endommageant ainsi le produit) ; 2) qui ne peut
être appliqué à l'aide d'une truelle, résultant ainsi en l'insatisfaction du consommateur quant au produit
fini (l'application de l'adhésif en forme de S sans être étalé uniformément à la truelle est déconseillé par
Technoform puisque les cordons de colle seront assurément visibles à travers les panneaux de
polystyrène une fois le produit installé).
Only use adhesive recommended for 45 mil thickness (maximum) polystyrene and which can be applied
with the help of a trowel. We also recommend that you use a white or clear adhesive since brownish
adhesive may show through the panels. Follow the manufacturer of the adhesive's instructions and
warnings. Technoform will not be held responsible if the informed consumer installs the product with an
adhesive which 1) is not recommended on polystyrene of 45 mil maximum thickness (and which could
potentially contain too many solvents, thus damaging the product) ; 2) cannot be applied with the help of
a trowel, thus resulting in consumer dissatisfaction with respect to the final product (the application of
the adhesive in S-shape without being spread evenly with a trowel is not recommended by Technoform
since the beads of adhesive will surely be visible throughout the polystyrene panels once the product is
installed).
1
,
1
(LePage) n'est pas
450.699.2424 – 1 877.377.4494 450.699.8484 info@technoform.ca www.technoform.ca
REQUIRED TOOLS & MATERIALS
Measuring tape
Level
Square
Pencil
Hole saw
Utility knife
2'' Masking tape
Caulking gun
1/4" v-notched trowel for spreading adhesive
One 304 ml cartridge of latex/acrylic caulk for
bathrooms
Four 310 ml cartridges of adhesive recommended
for shower and tub-surrounds*. For 73" and 80"
height surrounds, we recommend five cartridges.
* Recommended brand: No More Nails
surround (LePage) and Liquid Nails
surround (Liquid Nails).
1
Use of PL700
(LePage) is not recommended.
1
,
Tub
2
,
Tub
C5PCS202001-10