Table des Matières
Publicité
B-1
Hose latch tab
Languette de blocage
du tuyau
Pestaña de sujeción
de la manguera
B-2
Handle quick release
button
Bouton de
dégagement rapide
de la poignée
Botón de liberación
rápida del mango
B-3
Only MC-CG887
MC-CG887
uniquement
Sólo MC-CG887
B-4
Only MC-CG885
MC-CG885 uniquement
Sólo MC-CG885
8
B-HOW TO ASSEMBLE YOUR CLEANER
Notch
Fente
Ranura
Handle
Poignée
Mango
Lock button
Bouton de blocage
Botón de bloqueo
Adjust button
Bouton de réglage
Botón de ajuste
Wand quick release pedal
Pédale de dégagement
du tube
Pedal de liberación
rápida del tubo
Raised area
Portion en
relief
Área
elevada
Wand quick release pedal
Pédale de dégagement du tube
Pedal de liberación rápida del tubo
WARNING
Electrical Shock Hazard.
DO NOT plug into electrical supply until assembly is
complete.
Failure to do so could result in electrical shock or
injury.
B-1
Line up the hose latch tab and notch in canister hood
and insert the hose into the canister
until it snaps in place.
To remove: Do not open hood before removing hose.
With hood closed, lift hose latch tab
upward and pull on hose.
B-2
Insert the handle into the wand until lock button snaps
in place. Be sure the hose is not twisted.
To remove: Press the handle quick release button and
pull out the handle.
To store: Disconnect the hose from the wands and
canister to prevent stress on hose during
storage.
Store the hose in a loosely coiled position so the hose
covering is not stressed.
B-3
To adjust, simply push down on the wand adjust button
and slide the upper wand to the desired length.
To remove: Press wand quick release pedal.
Pull wands out of power nozzle.
B-4
Slide wands together until wand button snaps into
place. Turn wand button to slotted area of wand swivel.
Insert wands into power nozzle until the button snaps
into place.
Connect power nozzle plug and cord as shown.
Raised area of plug must face toward hand.
To remove: Press wand quick release pedal.
Pull wands out of power nozzle.
Publicité
Table des Matières
