Prior To Assembling The Insert; Chimney Draught - Nordpeis Q-23FL Manuel D'installation

1. Please follow the installation manual when
pipe to the surrounding materials.
2. Before use, please carefully read the user manual
and follow the instructions.
never be reduced or partially obstructed. This may
lead to overheating, which again can cause house
5. Never use other fuel than natural dry chopped
wood. Briquettes, peat, coke, coal and waste
from construction materials develops far higher
temperatures and emissions than natural wood.
Since your product has been designed for use
with natural wood only, other fuels may damage
IMPORTANT SAFETY PRECAUTIONS!
the product, chimney and surrounding
constructions.
6. In case of damage to glass or door gasket, all use
connecting your stove / fireplace to the chimney /
of the product must be discontinued until the
flue pipe. If connected differently from instruction
damage has been repaired.
please, consider the heat radiation from the flue
Advise: Even if not required in your area, it is always
3. Integrated or defined convection openings may
fire or serious damage to the product.
4. Use only designated fire starters. Never use
gasoline, diesel or other liquids to start the fire.
This may cause explosions!
Failure to follow these precautions will leave your
warranty void and expose people and property to
danger.
wise to have a qualified stove / fireplace fitter do the
installation, or at least the final inspection before use.
INDEX

Chimney Draught

Air Supply
2. Technical Information
3. Distance to combustible material
Removing the insert from the pallet
Operational control
Pulley radiation shield
Self closing door
Cleaning the glass
Radiation shields
Powerstone (accessory)
Flue collar and connection
Painting the surround
6. Maintenance
Cleaning and inspection
Ashes
Thermotte™
Door and glass

1. Prior to assembling the insert

Shared flue gas system
4. Assembly
All our products are tested according to the latest
European requirements and also to the Norwegian
standard NS 3058 and NS 3059, which include particle
tests. However, several European countries have local
regularly. It is the responsibility of the client that these
regulations are complied with in the country/region
responsible for incorrect installation.
5. Lighting the fire for the first time
Important to check
(please note that this list is not exhaustive):
•
materials
• insulation materials/requirements between
7. Warranty
•
8. Advice on lighting a fire
•
•
Some advice in case of combustion problems
Compared with older models, the clean burning inserts
1. Prior to assembling the insert
chimney. Even the best insert will not work properly
GB
regulations for installation of fireplaces, which change
where the fireplace is installed. Nordpeis AS is not
distance from firebox to combustible/flammable
fireplace surround and back wall
size of floor plates in front of fireplace if required
flue connection between firebox and chimney
insulation requirements if flue passes through a
flammable wall
Chimney draught
of today put significantly higher demands on the
17
18
18
19
19
19
19
19
19
19
20
20
20
20
20
20
21
21
17
18
19
20
21
21
23
17