Alarm Setting - Eurotops H 0157 Manuel D'instructions

H 0157 / H157C
Once the DCF was received, the display would be in Germany language. The default time is 0:00(time zone:00, time
format 24hr.),default date:01 Januar 2016, default week is Freitag (Germany)
Then you can long press the MODE to change the language.
If the wave tower do not appear in the display or can't receive the wave，please go to the manual setting.
B. Languages setting(After the receiving mode is finished)
1. Hold the MODE key steadily for around 3 seconds, the "ENGLISH" would flashing in 1HZ. Press UP/DOWN key to
adjust.
Re: 8 languages of weekday: ENGLISH > FRANCAIS > DEUTSCH > ITALIANO > ESPRNOL > NEDERLANDS > SVENSHR >
POLSHI
D. Manual Time setting
2. Press MODE key again " 12hr" would flashing, press UP/DOWN to switch 12hr/24hr, then press the MODE key again,
then the screen will display "
display, When screen appear "00", you can adjust the time zone through UP key or DOWN key. Finally enter into time
setting mode and use UP/DOWN to choose the value. The order of setting is hour, minute, year, month, date and day
of week. If you change to another time zone, the time would change automatic.
3. The week will be automatically set.
4. If you do not touch any key for 20 seconds, it'll be back to the time mode.
C. Alarm setting:
1. There are two alarms for any time: Alarm1 and Alarm 2 shows with icon
1.1 At time mode, press MODE key one time to swift to Alarm 1 mode.
1.2 Hold and press MODE key steadily for around 3 seconds to enter setting mode. Press UP/ DOWN key to adjust.
1.3 The setting sequence is hour, minute. Then press ALARM key to confirm.
1.4 In time mode, Press UP to turn on/off alarm 1/2.
1.5 When alarm on, if you don't press any key to stop the alarm, it lasts for 1 minute. Or you can press any key to stop
the alarm.
1.4.1 0-10 seconds with BI only;
1.4.2 11-20 seconds with BIBI sound;
1.4.3 21-30 seconds with BIBIBIBI sound,
1.4.4 after 31 seconds with continuing BI sound.
1.5 Alarm 2 setting is same as Alarm 1.
2. To turn on/off the alarm:
2.1 At normal mode, press UP key one time to turn on the alarm 1, the icon
2.2 At normal mode, press UP key two time to turn on the alarm 2. the icon
2.3 Press the UP key three time the icon
E. Snooze
1. When alarm on, the icon
the display.
3. When snooze on the would flashing .
F. Temperature
At normal mode, press DOWN key to change temperature display unit in ℉ or ℃.
G. Safety lock
Long press both the "UP" key and "DOWN" key to turn up/off safety lock.
The would appear in the display. Under the
do not have any effect on the functions.
Hinweis: Die Gebrauchsanweisung vor dem Gebrauch des Geräts aufmerksam lesen und für spätere Einsicht aufbewahren.
RCC ON" , press UP or DOWN to turn on/off RCC. Press MODE again to go to the next
and are all disappear. All the alarm off.
or would flashing, press SNOOZE to go into the snooze mode. Icon would appear in
circumstances, the display was fixed, press the key
FUNKUHR « EASY READING »
and icon .
would appear.
would appear
DE