Rack Mounting; Voltage Conversion (For General Export Models); Connections; Connection - TEAC PROFESSIONAL Tascam MD-350 Manuel Du Propriétaire

Rack Mounting

Install this deck with the provided
mounting screw kit as illustrated.

Connections

... Turn off power for all equipment before
making connections.
... Read instructions of each component
you intend to use with the MD deck.
ª Connection
ANALOG INPUT/OUTPUT
(BALANCED/UNBALANCED) terminals
Use these terminals to connect the deck to
a mixer, cassette tape recorder or other
components.
... Be sure to insert each plug securely. To
prevent hum and noise, do not bundle
the connection cords with the power
cord or speaker cord.
DIGITAL INPUT 1/OUTPUT terminals
Use these terminals to connect the deck to
a digital component (such as a CD player,
DAT deck, digital amplifier, or another MD
deck).
... Use a digital optical (TOS) cable
(optional) for digital recording. Connect
the [DIGITAL IN 2] terminal located on
the front panel to a digital component
such as a DAT/MD deck.
... When making a digital connection,
remove the caps from the terminals.
When the terminals are not in use, leave
the caps in place.
– 6 –
Voltage Conversion
(For general export models)
Be sure to remove the power cord from the
AC outlet before repositioning the voltage
converter switch.
1. Locate the voltage selector on the rear
panel.
2. Using a flat-bladed screwdriver, set to
the appropriate 230 V or 120 V position
according to your area.
IN NORTH AMERICA DANSL'AMERIQUE
USE ONLY ON 120 V DU NORD:
SUPPLY. UTILISABLE SUR 120 V
D'ALIMENTATION
UNIQUEMENT
ª Power cord
Be sure to connect the power cord to an
AC outlet which supplies the correct
voltage.
... Hold the power plug when plugging or
unplugging the power cord.
.