Repeating Track(S) (Repeat Playback); Timer Playback; Pitch Control; Play Modes - TEAC PROFESSIONAL Tascam MD-350 Manuel Du Propriétaire

Buttons used on this page
ª
To add a track to the program
µ
In the Stop mode, turn the [
dial to select the desired track number and
press [PUSH ENTER] on the dial.
A track can also be added from the remote
control unit by simply entering the track
number with the numeric buttons
(1 to 9, 0, +10).
... The new track is appended to the end of
the existing program.
Repeating Track(s)
(Repeat Playback)
All or one of the tracks, or a specified
portion (A-B) of an MD can be played
repeatedly. Program playback and Shuffle
playback can also be repeated.
ª To repeat all MD tracks
(All-track repeat)
1. In the Stop mode, press the [PLAY
MODE] button to select one of the
following repeat play modes.
Play Mode Repeat
CONTINUE Normal repeat
SHUFFLE MODE Shuffle repeat
PGM MODE Program repeat
2. Press the [REPEAT] button on the
remote control unit once to display
"REPEAT ALL".
... "
" lights up.
¥
3. Press the [ PLAY] button.
The tracks will be played repeatedly in
the specified mode.
... To release REPEAT playback and
resume normal playback, press the
[REPEAT] button repeatedly until
"REPEAT OFF" appears.
... The Repeat Playback mode will not be
canceled even when the power is
turned off.
ª
To repeat a single track
(Single-track repeat)
1. During playback in the "CONTINUE
MODE", press the [REPEAT] button on
the remote control unit twice.
... "REPEAT 1" appears ("
≤
TRACK ]
"
2. Press the [
track will be repeated.
3. The track to be repeated can be
changed by turning the [
dial or by pressing the [
buttons or numeric buttons (1 to 9, 0,
+10) on the remote control unit.
... Single-track repeat is unavailable in the
"SHUFFLE MODE" or "PGM MODE".
ª
To repeat a section within a track
(A-B repeat)
A specified portion (between A and B) of a
track can be played repeatedly.
1. During playback, press the [A-B] button
on the remote control ("REPEAT A–" is
displayed, and "
" " blinks) at the starting point (A) of
the portion you want to repeat.
2. Press the [A-B] button again ("REPEAT
A-B" is displayed, and "
" " light steadily) at the ending point
(B). The portion (A-B) will be played
repeatedly.
... A-B repeat playback of portions
extending over more than one track is
not possible during programmed
playback or shuffle playback.
... To cancel Repeat playback and resume
normal playback, press the [A-B] button
or [REPEAT] button again.
("REPEAT OFF" is displayed.)
... Press the [
specified portion (between A-B).

Timer Playback

By connecting this deck with a timer
(commercially available), playback can be
started at a specified time.
1. Insert a pre-recorded MD and set the
[TIMER] switch to [PLAY].
2. Select the amplifier's input which
allows this deck to play back.
... Timer playback is available when
"SHUFFLE MODE", "PGM MODE", "ALL
REPEAT" or "REPEAT SINGLE" playback
is selected.
" and
" light up).
¥
PLAY] button. The current
µ ≤
TRACK ]
µ ≤
TRACK ]
" lights up,
" and
ª
STOP] button to erase the
– 15 –
3. Set the timer to the desired start time
and turn off the power.
When the set time comes, each
component will be turned on and
playback will start.
... Set the [TIMER] switch back to [OFF]
after timer playback.

Pitch control

You can use the pitch control feature to
play back material at ±12.0% relative to the
normal playback pitch. This feature is not
available in LP2 mode.
To set the pitch change which will be
operative when the PITCH ON/OFF switch
is on:
1 In stop, play or pause mode, press the
[EDIT/NO] button until "Pitch?" appears.
2 Press the [YES] button.
µ ≤
3 Turn the [ TRACK ] dial to adjust
the pitch in 0.1% steps.
4 Press the [YES] button after making the
adjustment.
... The value set in this way does not take
effect until the PITCH ON/OFF switch is
set to ON.
... Note that when the position of the
PITCH ON/OFF switch is changed, the
sound is momentarily muted.

Play modes

Tracks recorded in different modes (SP,
MONO, LP2 and LP4) can be combined on
one disc. When playing back a disc, the
appropriate mode is automatically
selected as each track is played back, and
this is shown on the display.