Makita AN611 Manuel D'instruction page 8

Nails
Nail
Handle nail coils and their box carefully. If the nail coils
have been handled roughly, they may be out of shape
or their connector breaks, causing poor nail feed.
Avoid storing nails in a very humid or hot place or place
exposed to direct sunlight.
Humid
Nail
MAINTENANCE
CAUTION:
• Always disconnect the air hose from the tool
before attempting to perform inspection or
maintenance.
• Never use gasoline, benzine, thinner, alcohol
or the like. Discoloration, deformation or cracks
may result.
Maintenance of nailer
Always check the tool for its overall condition and loose
screws before operation. Tighten as required.
Make sure all safety systems are in working order
before operation. The tool must not operate if only the
trigger is pulled or if only the contact element is pressed
against the wood. It must work only when both actions
are performed. Test for possible faulty operation with
nails unloaded.
Hot
Make sure that the trigger is locked when the change
lever is set to the LOCK position.
► 1. Change lever 2. Trigger lock
When the tool is not to be used for an extended period
of time, lubricate the tool using pneumatic tool oil and
store the tool in a safe place. Avoid exposure to direct
sunlight and/or humid or hot environment.
8 ENGLISH
1
2