Implémentation Midi; Cartes Mémoires Préconisées; Receive Data - Roland SP-404 Mode D'emploi

Appendices
Message
S.oF (Send/Return mode off)
S.on (Send/Return mode on)
SAV (Backup Save)
trC (Truncate)
UnS (Unsupported format)
WAV
Cartes mémoires préconisées
À la date d'écriture de ce manuel, Roland confirme la compatibilité des cartes ci-après avec la SP-404.
Constructeur
BUFFALO
HAGIWARA SYS-COM
I•O DATA
SanDisk
* Capacités acceptées: 32 MB, 64 MB, 128 MB, 256 MB, 512 MB, 1 GB
Implémentation MIDI
Model: SP-404
Date: July 12, 2005
Version: 1.02

1. Receive data

■Channel Voice Messages
* For the correspondence between note numbers and pads, refer to "MIDI on the SP-404"
(p. 41).
●Note Off
Status 2nd byte
8nH kkH
9nH kkH
n = MIDI channel number: 0H - FH (ch.1 - ch.16)
kk = note number: 2EH - 76H (46 - 118)
vv = note off velocity: 00H - 7FH (0 - 127)
●Note On
Status 2nd byte
9nH kkH
n = MIDI channel number: 0H - FH (ch.1 - ch.16)
kk = note number: 2EH - 76H (46 - 118)
vv = note on velocity: 01H - 7FH (1 - 127)
■Channel Mode Messages
* If the following channel mode message is received during realtime recording, note-off
messages will be generated for all notes on the corresponding channel that are currently
on, and those note-off messages will be recorded.
●All Sounds Off (Controller number 120)
Status 2nd byte
BnH 78H
n = MIDI channel number: 0H - FH (ch.1 - ch.16)
* If the All Sound Off message is received, all notes will be silenced regardless of their
channel.
50
Signification
Mode Send/Return désactivé.
Mode Send/Return activé.
Données en attente de sauvegarde.
Troncature d'échantillon.
Opération annulée pour cause de format WAV ou AIFF non compatible avec la SP-404.
L'export de fichier audio se fera au format WAV.
Modèle
RCF-G (256 MB, 1 GB), RCF-X (32 MB, 64 MB, 128 MB, 512 MB)
Zpro: HPC-CF128ZP (128 MB), HPC-CF512ZP (512 MB), HPC-CF1GZP (1 GB)
CFS-32M (32 MB)
ultra II: SDCFH-256-903 (256 MB), SDCFH-512-903 (512 MB), SDCFH-1024-903 (1 GB)
3rd byte
vvH
00H
3rd byte
vvH
3rd byte
00H
■System Common Message
●Song Position Pointer
Status 2nd byte
F2H mmH
(mm ll: 00 00H - 7F 7FH (0 - 16383))
* This message is received if Sync Mode is AUTO.
■System Realtime Message
●Timing Clock
Status
F8H
* This message is received if Sync Mode is AUTO or TEMPO.
●Start
Status
FAH
* This message is received if Sync Mode is AUTO.
●Continue
Status
FBH
* This message is received if Sync Mode is AUTO.
●Stop
Status
FCH
* This message is received if Sync Mode is AUTO.
●Active Sensing
Status
FEH
3rd byte
llH