Frequently Asked Questions - ecofort Airfree Iris 80 Manuel D'instruction

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1. How does Airfree
®
Airfree
®
destroys microorganisms at its heated capillaries. Contaminated air is dragged into Airfree
ramic core by air convection and microorganisms are destroyed at high temperatures regardless of how
resistant and dangerous they might be.
2. Are there any side effects?
No. Airfree
'
s new technology uses heat to purify the air. No side effects, no emissions, NO IONS, nor new
particles are generated. Airfree
purifying the air.
3. My Airfree
®
does not stop blinking. What does that mean?
Cause 1: Airfree
®
incorporates an automatic energy-saving feature that automatically shutts off the ceramic
core when it reaches over the required temperature to start and maintain the air convection that draws the
air into the machine to destroy microorganisms and organic odours. In this event the ceramic core shuts
down for a few minutes, and the top lights will blink (in the models that have top lights). During this period
Airfree
®
continues to sterilise the air.
Cause 2: Another factor to Airfree
regulates itself to turn off the ceramic core for a few minutes while still sterilising the air, causing the top
lights to blink in those models that have the top lights. During this event there is no energy consumption.
Cause 3: Airfree
®
incorporates state of the art electronics detecting any improper placement or device
mal¬functioning. If the top lights does not stop blinking, please ensure that your Airfree
posi¬tion. If the top and bottom air inlets are free of blockage, or if your Airfree
electric outlet. Just in case always plug your Airfree
lights continue blinking and your Airfree
deffective in which case please contact your dealer.
4. Is there any risk when the top light of Airfree
No. When Airfree
®
electronics detect any irregularity it automatically shuts off the TSS™ ceramic core.
5. What is Airfree
'
s air cleaning capacity?
Iris 40 was designed for rooms up to 16 m², Iris 60 was designed for rooms up to 24 m², Iris 80 was designed
for rooms up to 32 m², Iris 125 was designed for rooms up to 50 m², Iris 150 was designed for rooms up to
60 m².
6. Can I install Airfree
Yes, as long as it has at least 10 m³. Airfree
reduced. * as reference 10 m³ is approximately 2.15 m x 2.15 m.
7. Can I use Airfree
®
in air conditioned rooms?
Yes.
8. How do I know if Airfree
Check the top lid, if warm Airfree
9. Can I place Airfree
®
No. Airfree
®
will just reduce air pollution in the corridor's area.
10. Can I place Airfree
Yes. Please remember such a room must have at least 10 m
m x 2.15 m.
11. Does Airfree
®
eliminate bacteria and viruses?
Yes. Unlike the air filters in the market Airfree
are easily carried by Airfree
12. Should I turn off Airfree
No. Airfree
®
must always be on.

Frequently Asked Questions

work?
should be used in all homes and offices, quietly, constantly, and efficiently
®
'
s blinking occurrence is the ambient air over 35 ºC when Airfree
®
unit is correctly installed, that indicates that the device may be
®
in my walking closet ?
®
®
is no longer working?
®
is working.
at the corridor to reach the whole house?
in a closed room?
®
'
s airflow into its heated ceramic core.
®
when I leave house?
®
into a different outlet. If in the next 10 minutes the top
is blinking?
®
should not be placed under shelves or its efficiency will be
. * as reference 10 m³ is approximately 2.15
3
®
is more efficient with the smallest microorganisms as they
13
'
s ce-
®
auto-
®
unit is in the upright
®
is connected to a faulty
E
n
g
l
i
s
h

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Airfree iris 150Airfree p40

Table des Matières