Installing And Connecting - ecofort Airfree Iris 80 Manuel D'instruction

Plug the power cord into the nearest outlet.
Make sure the surface is dry (never place your Airfree
Make sure the blue led on the side is on. After 10 minutes the top lid should be warm.
Place your Airfree ® on flat surfaces not under furniture, shelves, or behind curtains as it will
reduce airflow and Airfree
Place each Airfree ® Iris 40 in rooms up to 16 m², Airfree
Iris 80 in rooms up to 32 m², Airfree
up to 60 m². For larger rooms use proportionally additional Airfree
Airfree ® in rooms larger than recommended will reduce Airfree
Airfree ® must be continuously on in the same room, 24 hours a day.
Airfree ® can only be used in rooms with minimum air volume of 10 m
Airfree ® can be installed in rooms equipped with air conditioning and heating systems.
However it is recommended not to place Airfree
in Airfree ® air flow.
Airfree ® can be placed in corridors but its air sterilisation effects will not affect adjacent rooms.
Airfree ® shall not be placed near doors or under windows to avoid sterilised air to exit the
room.
To change top light colours press the sensor on the top of Airfree
to the next colour. For the random mode please switch to pink and let it be. Maintaining finger
pressed on the sensor will increase or diminish brighteness.

Installing and Connecting

' s efficiency in the reduction of microorganisms.
® Iris 125 in rooms up to 50 m², Airfree
10
® on a wet floor or immerse it into water).
® Iris 60 in rooms up to 24 m², Airfree
® units. The use of just one
® efficiency.
, free of obstacles.
3
® nearby them to avoid potential interference
' s logo. Each touch will switch
®
® Iris 150 in rooms