Intended Use; Safety Rules - Panasonic EY3640 Instructions D'utilisation

Original instructions: English
Translation of the original instructions:
Other languages

. INTENDED USE

I
Thank you for purchasing the Panasonic
Sealing Gun. This Sealing Gun is for
pushing the sealing compounds. Sausage
type and cartridge type are applicable for
this model. The speed can be adjusted
according to work.
II . ADDITIONAL

SAFETY RULES

1) Be aware that this tool is always in an
operating condition, since it does not
have to be plugged into an electrical
outlet.
2) Be careful not to get your ties or wide
cuffs rolled into the rack.
3) Stop using the tool if you notice
something abnormal.
4) During charging, the charger may
become slightly warm. This is normal.
Do NOT charge the battery for a long
period.
5) The appliance is not intended for use
by young children or infirm persons
without supervision.
6) Young children should be supervised
to ensure that they do not play with the
appliance.
WARNING:
• Do not use other than the Panasonic
battery packs that are designed for use
with this rechargeable tool.
• Panasonic is not responsible for any
damage or accident caused by the use
of the recycled battery pack and the
counterfeit battery pack.
• Do not dispose of the battery pack in a
fire, or expose it to excessive heat.
• Do not drive the likes of nails into the
battery pack, subject it to shocks,
dismantle it, or attempt to modify it.
• Do not allow metal objects to touch the
battery pack terminals.
• Do not carry or store the battery pack
in the same container as nails or similar
metal objects.
• Do not charge the battery pack in a
high-temperature location, such as next
to a fire or in direct sunlight. Otherwise,
the battery may overheat, catch fire, or
explode.
• Never use other than the dedicated
charger to charge the battery pack.
Otherwise, the battery may leak,
overheat, or explode.
• After removing the battery pack from
the tool or the charger, always reattach
the pack cover. Otherwise, the battery
contacts could be shorted, leading to a
risk of fire.
• When the Battery Pack Has
Deteriorated, Replace It with a New
One.
Continued use of a damaged battery
pack may result in heat generation,
ignition or battery rupture.
Preparing the sealing gun
For preparation of sealing compound,
such as cutting the opening to the desired
diameter, follow the instructions of the
cartridge / sausage pack.
. ASSEMBLY
III
Attaching or Removing
Battery Pack
CAUTION:
Before inserting battery pack, check that
the trigger in the tool actuates properly and
returns to the "OFF" position when
released.
1. To connect the battery pack (Fig. 1)
Line up the alignment marks and attach
the battery pack.
• Slide the battery pack until it locks into
position.
2. To remove the battery pack (Fig. 2)
Push on the button from the front to
release the battery pack.
- 11 -