Safety Warnings; Set Contents; How Does It Work - Marmitek DOORGUARD 100 Guide Utilisateur

SAFETY WARNINGS

• To prevent short circuits, this product should only be used inside and only in dry spaces.
Do not expose the components to rain or moisture. Do not use the product close to a bath,
swimming pool etc.
• Do not expose the components of your systems to extremely high temperatures or bright
light sources.
• Do not open the product: the device contains live parts. The product should only be
repaired or serviced by a qualified repairman.
• In case of improper usage or if you have opened, altered and repaired the product yourself,
all guarantees expire. Marmitek does not accept responsibility in the case of improper usage
of the product or when the product is used for purposes other than specified. Marmitek
does not accept responsibility for additional damage other than covered by the legal
product responsibility.
• This product is not a toy. Keep out of reach of children.
• Adapters: Only connect the adapter to the mains after checking whether the mains voltage
is the same as the values on the identification tags. Never connect an adapter or power
cord when it is damaged. In that case, contact your supplier.
1.Introduction
Congratulations on buying the Marmitek DoorGuard 100. With this video-door phone you
can always (even anonymously) see and hear who's at the door, before you decide to open
up. The camera is hidden inside the small doorbell and has a good picture quality, even in the
dark. The doorbell camera is small enough to mount it onto the door frame. This means you
do not need to drill any holes in the (hollow) walls.

2.Set contents

• 1 monitor
• 1 wall plate for the monitor
• 1 doorbell with camera
• 1 wall bracket
• 1 sun or rain hood
• 10 metres 4-wire extension cable
• selection of connections and screws
• this manual

3.How does it work?

The visitor rings the doorbell (the one connected to the camera). You hear a ding-dong. The
picture and sound of the visitor is directly transferred onto the monitor. If you want to com-
municate with the visitor, you can pick up the receiver and talk to the visitor. If you have fitted
an electric lock (available separately at the specialist's), you can open the door remotely.
3.1 How is the DoorGuard mounted?
You need to drill a hole in the door frame, at the height you want to mount the doorbell
camera. Connect the wall bracket with the small doorbell camera to the frame with the
screws. You then fit the monitor with the wall plate elsewhere in the house, e.g. in the hall-
way. You do need to place the monitor close to a wall socket. The cable from the doorbell
camera can be connected to the extension cable and plugged into the monitor. Now you can
see who's at the door before you decide to open it.
DOORGUARD 100 TM 3