wtw Turb 430IR Mode D'emploi Abrégé page 6

General operating principles
Keypad
Measured value display
Menus and dialogs
6
.
PRT
Note
Keys with an additional number printed on are assigned doubly.
This enables to directly enter numbers in special menus. Thus, you
can, for example, conveniently enter the date and time via the number
keys.
In the measured value display, open the menu with <MENU>.
The menus for settings and dialogs in procedures contain further
submenus. The selection is made with the <L> <M> keys.
The current selection is displayed in reverse video.
! Menus
The name of the menu is displayed at the upper edge of the frame.
Switch to the measured value display
<M>
Start calibration
<CAL/ZERO>
Open menus / confirm entries /
start measurement
<START/ENTER>
Call up the Configuration menu
(all settings are made here)
<MENU>
Switch the meter on/off
<ON/OFF>
Output display contents to RS232 interface (e.g.
print)
<PRT>
Open the Store menu: <STO>
Quick storing: 2 x <STO>
Highlight menu items or selection;
Set values
<L>, <M>
Switch to the next higher menu level /
cancel input
<ESC>
Turb 430 IR
ba75506e01 04/2005