VT RFS 6000 Mode D'emploi page 12

Ready filter set
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Not only to remove trouble, but also to be sure of a satisfactory water yield, regular
maintenance on the pump will have to be carried out. Proceed as follows:
l Deactivate the power voltage, remove the pump from the pond and open the
housing.
l Remove the 4 screws of the pump holder en take out the pump.
l Open the motor case by turning the impeller holder.
l Carefully remove the impeller from the motor case.
l Clean all parts under freely running water, using a soft brush.
l Assemble all parts in reverse order. Take care that the impeller will run smoothly
again in the motor housing and that the rubber ring is mounted in the right way.
GUARANTEE
The manufacturer guarantees the correct functioning of this apparatus for a period
of 24 months after purchase. The warranty expires in case of repairs, changes or
additions to this product that are performed by others than the manufacturer. If a
claim to guarantee can be laid, a dated receipt should be presented.
VT
The Netherlands
A division of the Velda®Group
w w w. v t . n l - i n f o @ v t . n l

Publicité

Table des Matières
loading

Produits Connexes pour VT RFS 6000

Ce manuel est également adapté pour:

Rfs 9000

Table des Matières