VT RFS 6000 Mode D'emploi page 10

Ready filter set
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

l Dévisser les 4 vis du support de pompe et enlever la pompe du boîtier-crépine.
l Accéder à la chambre moteur en desserrant le réceptacle de la roue à aubes.
l Sortir avec précaution la roue aubée du carter du moteur.
l Nettoyer convenablement toutes les pièces à l'aide d'une brosse douce sous une
eau courante abondante.
l Remonter les pièces en exécutant la procédure dans le sens inverse du démon-
tage. Assurez-vous que la roue aubée tourne facilement dans le carter du moteur et
que l'anneau en caoutchouc est convenablement en place.
GARANTIE
VT garantit le fonctionnement parfait de cet appareil pendant une période de 24 mois
à compter de la date d'achat. La garantie est annulée en cas des réparations,
modifications ou extensions de produit effectuées par d'autres personnes que le
fabricant. Toute mise en jeu de la garantie doit s'accompagner de la présentation du
bon d'achat daté.
GB
INSTRUCTIONS READY FILTER SETS
There are 2 Ready Filter Sets:
Eco Filter Set 6000 + UV-C 9 Watt + pump 1500 l/h suitable up to 6000 litres
Eco Filter Set 9000 + UV-C 11 Watt + pump 2000 l/h suitable up to 9000 litres
USER INSTRUCTIONS
!
Open the cover and remove the holder with foam from the filter. Mount the outflow
swivel 50 mm on the outlet of the filter.
!
Mount the hose swivel 20 mm on the outlet of the pump (A). Connect the filter
hose to the hose swivel and the other end to the inlet of the filter (B). Use hose
clamps for a watertight connection. Place the cover with the UV-C unit on the filter.
!
Install the filter outside the pond above the water level. Place the pump in the
pond, never in the bottom sludge but use an elevation, made from a number of
stones. Make sure that the pump will remain free from coarse floating dirt.
!
Activate the pump and the UV-C lamp by connecting the plug to the socket.
Check the function of the UV-C lamp through the looking hole in the cover.
!
This pond filter is a mechanical/biological filter. The biological action will optimize
after a few weeks. Let the filter function continuously (when the weather is frost-free).
When the filter will be at rest during a longer period of time (5 hours or more), the
colony of bacteria will die for the greater part. Add nitrifying bacteria to start up the
biological process.
!
During the winter season, at temperatures below 0°C, the filter should be switched
off. Clean all parts and keep them in a dry frostfree place.

Publicité

Table des Matières
loading

Produits Connexes pour VT RFS 6000

Ce manuel est également adapté pour:

Rfs 9000

Table des Matières