Télécharger Imprimer la page

Latchways ManSafe SRL Mode D'emploi page 96

Masquer les pouces Voir aussi pour ManSafe SRL:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
H
1
2
8
3
7
5
1
2
7
9
5
I
96
TO STRUCTURAL ANCHOR POINT
Tel: +44 (0)1380 732700 www.latchways.com
7m (23ft) CABLE SRL
:
Serial # :
Part #: 62207-00
Warning—This device is for overhead use only. Not suitable for horizontal use
Specifications: Ø 5 mm (Ø 3/16 in.) Stainless Steel Cable / Max. Arrest Force: <6 kN (1350 lbs),
Average Arrest Force: ≤4 kN (900 lbs). Size: 330 (L) x 170 (W) x 122 (D) mm / Weight: 4.9 kg.
Max. Free Fall Distance: 0.6 m (2 ft). Inspect before each use.
NSN 4240-99-884-6994
Visual Load Indicators
Inspect for red coloured coil protruding
from case and inspect hook for any
exposed red colour. If at least one is visible,
then loading has occurred. The device
must be removed from service.
DO NOT USE.
EN
Made in UK
EN 360:2002
Warning:
Follow the
manufacturer's instruction
included with this product
at the time of shipment
Only one user to be connected to this device at any time. Alteration
or misuse of this product, or failure to follow instructions may result in
serious injury or death. This device must be removed from service
immediately when the visual load indicator is deployed. See other
markings.
Avertissement:
Observer les consignes du fabricant accompagnant
ce produit. Ne jamais relier plus d'un seul utilisateur à cet appareil. Toute
modification ou mauvais usage du produit, ou non-observation des consignes, peut
entraîner blessure grave ou mort d'homme. Retirer le produit du service dès que l'indicateur de charge est
déployé. Voir les autres marquages.
Use:
Minimum rigid anchor strength 5000 lbs
(22 kN). Anchor device directly above
include: activating the audible clicking mechanism, testing
working area at an angle no greater than
the locking and retracting function, checking operation of
30º from vertical. For anchorages below
the connector, checking load indicator is not deployed
shoulder level refer to user manual.
and checking for evidence of defects, damage or
Always ensure lifeline is in tension
missing parts. Conduct periodic inspection at least
when in use. Full body harness must
annually by an authorized inspection entity and
be used when connected to this
record in the product inspection log. Label/mark the
device. Use caution when lifeline
product with the next periodic inspection date. Do
is used near sharp edges. For
not use if inspection reveals an unsafe condition.
use by trained personnel only.
Contact an authorized repair entity for repairs
Suitable for use with
and recertification. Record repair and
Latchways horizontal
recertification in the product inspection log.
lifelines.
EN
ANSI
CSA
ANSI
CSA
TO
STRUCTURAL
ANCHOR POINT
Inspection:
Always inspect before use. This shall
6
4
9
10
6
4
8
10

Publicité

loading