Saitek Cyborg 3D Rumble Force Stick Manuel D'utilisation page 9

Getting Started
Right-click on the controller icon in the taskbar next to your clock.
1
From the pop-up menu click Profile Editor.
2
In the profile editor select the button you want to assign a keyboard command to. You do this by right-clicking on the button from the list on the
3
right of the screen.
From the drop-down menu click New Key Presses.
4
You will then have a small window called the Keypress Editor with a flashing cursor in it. Simply press the key(s) on the keyboard you wish to
5
assign to your controllers button and then click OK.
Repeat this procedure for all the buttons you wish to program and then click File, Save at the top of the Profile Editor window.
6
Name the profile as you wish (usually it is recommended to call it the name of the game that the profile is intended for) and then click Save.
7
To enable the profile either click the Profile Now icon at the top of the Profile Editor (it looks like a black and yellow crosshair) or right-click on
8
the controller icon in your taskbar and select the name of the profile from the pop-up list of options.
9 You will notice that when a profile is loaded that the controller icon in your taskbar has a green square behind it, indicating that a profile is
currently loaded. If you wish to unload a profile simply right-click on the controller icon and click Clear Profile from the pop-up list of options.
10 For a complete guide on how to program your Saitek controller, visit the Saitek website at www.saitek.com.
TROUBLESHOOTING
Q My computer is not recognizing the Cyborg 3D Rumble Force – what's wrong?
A Check the cable connections. Turn off the computer and then unplug your controller. Plug it back in making certain that is securely attached.
Q Can I have another game controller connected to my PC at the same time?
A To avoid potential problems and conflicts, we recommend that you remove any existing game controllers before installing the Cyborg 3D Rumble
Force. Do this by selecting the previously installed controller in the Game Controllers window and clicking on Remove.
Q I have plugged in my Cyborg 3D Rumble Force using the USB connector and it has not been recognized by the computer.
A Your USB connection may not be enabled within the computer. You can switch it on via your computer's BIOS settings (please check the
documentation that came with your computer). If you are still unsure as to what to do, contact Technical Support.