Beetronics 27HD7M Manuel D'utilisation page 11

Each Beetronics monitor has different video connections (HDMI, VGA, RCA or BNC) and inputs. It is important that the video
connection used and the selected input match. This can be done with the buttons on the back of the monitor or with the supplied
remote control. By default, the screen is set to the HDMI channel.
Below is an overview of the available video and audio connections. You can use these as a reference when connecting your
monitor.
HDMI VGA
5. To change the input on the remote, click on Input and cycle up or down to select the desired input.
6. Click OK on the remote to confirm your selection.
If the resolution and signal of the video source are supported, you have finished setting up the monitor. It is now ready for use.
NOTICE! Below is the list of all the compatible cables and the maximum length recommended:
Power supply (included) - 1.2 meters
HDMI (sold separately) - up to 10 meters (can be extended with an active HDMI extender)
VGA (sold separately) - up to 15 meters
RCA (sold separately) - up to 50 meters
BNC (sold separately) - up to 100 meters
I N S T A L L I N G T H E M O N I T O R
BNC RCA
(video)
10 EN
3.5mm 3.5mm
(input) (output)
USB
(media)