Removing/ placing drawers
54
User manual
Placing the shelves
1.
Place pin (1) in the opening (2)
of rails (C)
2.
Push side (B) into the direction
of side (A), until pin (3) fits into
the next hole (4) of the rails;
3.
Place the other plate carriers at
the same height
4.
Place the supporting platform
(D) with the openings (6) onto
the pins (5).
Removing drawers
1.
Open de drawer
2.
Grap the front and back side
3.
Lift the front side
4.
Slide the container forward
5.
Lift the drawer from the rails
Lade plaatsen
1.
Make sure the drawer slides are
fully extended
2.
Grap the front and back side
3.
Place the back of the rear side
on to the openings on the pins
4.
Place
the
openings of the pins
front
with
the