Connecting The Communication Module To; Power; Resetting The Communication Module - Jøtul Pellet Connection Box Manuel D'installation, D'utilisation Et D'entretien

7 CONNECTING THE
COMMUNICATION MODULE
TO POWER
• Connect the power feeder's plug to the power link of
the communication module.
• Connect the power cord to the electrical socket (fig.
4.3).
• Switch on the stove by pressing the master switch.
8 RESETTING THE
COMMUNICATION MODULE
The communication module is equipped with a reset
button, which the user can use to restore the device's
factory settings.
Use:
• Disconnect the communication module from power.
• Press the reset button and simultaneously connect the
module to power without releasing the button.
• Press and hold the reset button for 30 seconds.
ENGLISH
fig� 4�3
fig� 4�4
31