System Configuration; Components Required For Operation, Such As Remote Control Pilot; Contents Of Communication Module - Jøtul Pellet Connection Box Manuel D'installation, D'utilisation Et D'entretien

ENGLISH

3 SYSTEM CONFIGURATION

3�1 COMPONENTS REQUIRED FOR
OPERATION, SUCH AS REMOTE
CONTROL PILOT
• "JØTUL PELLET CONTROL" application for devices
with Android or IOS, properly installed on the device.
• Jøtul stoves or pellet inserts compatible with the
communication module.
• Communication module.
• Free power socket.
3�2 COMPONENTS REQUIRED FOR
OPERATION WITH A WI-FI NETWORK
The components required for operation with a Wi-
Fi network are identical to those listed in point 1.1. In
addition, there are two configuration modes to choose
from:
3�2�1 Basic configuration:
• Wi-Fi network available from the level of the
communication module.
• Password to your Wi-Fi network.
3�2�2 Advanced configuration:
• Ethernet cable network to which the communication
module must be connected.
• UTP Ethernet network cable of at least category 5e.
3�3 COMPONENTS REQUIRED FOR
REMOTE SERVICE (INTERNET)
Router connected to the Internet.
4 CONTENTS OF
COMMUNICATION MODULE
1
A) Power link
B) Port for Ethernet network cable
C) Reset button
D) USB port
E) Power socket
F) External LED
G) RJ11 connector
H) Electrical power supply
I) Internal LED
28
3
5
6
1) Communication module
2) Electrical power supply
3) m/m RJ11 cable
4) m RJ11-f MODU2 4-pin cable
5) RJ11 three-conductor connector
6) Hook-and-loop strap
2
4