VESTEL EVC02-AC22 Série Manuel D'utilisation page 5

Then press the icon as shown in Figure 4.
2- Choose Device Installation screen and find the
EVC by following steps as shown in Figure 5 and 6.
If there is no device on "Device Installation"
screen, restart the EVC by disconnecting from AC
mains supply and connecting to AC mains supply
again. During restart, press the button for 3 seconds
to configure the connection.
Figure.3
Figure.4
Figure.5
3- Use your account and password, write a device
name as shown in Figure 7.
Then choose Scan Network and Select as shown in
Figure 8.
4- Enter your router password and press connect as
shown in Figure 9.
Remote control application is ready to use. If your
WiFi modem password is changed, you have to
configure the EVC WiFi connection again. Restart
the product and press the button for 3 seconds.
Then repeat all steps again.
English - 4 -
Figure.6
Figure.7
Figure.8