Specifications - Mettler Toledo IND560 PDX Guide D'installation

IND560 PDX Installation Manual

Specifications

The IND560 PDX terminal conforms to the specifications listed in Table 1-2.
Enclosure Type
Dimensions (l × w × d)
Shipping Weight
Environmental Protection
Operating Environment
Hazardous Areas
Power
Display
Weight Display
Scale Types Supported
Number of Cells
1-4
Table 1-2: IND560 PDX Specifications
IND560 PDX Specifications
Panel-mount stainless steel front panel with an
aluminum frame
Harsh environment desk/wall/column-mount type 304L
stainless steel enclosure
Panel Mount: 265 mm × 160 mm × 92 mm
(10.4 in. × 6.3 in. × 3.6 in.)
Harsh Environment: 265 mm × 160 mm × 170 mm
(10.4 in. × 6.3 in. × 6.7 in.)
3.5 kg (8 lb)
Panel-mount front panel sealing is UL-approved, and
provides type 4x and type 12 protection – comparable
to IP65 rating
Harsh Environment is UL-approved, and meets IP69K
requirements
The terminal (both enclosure types) can be operated at
temperatures ranging from −10° to 40° C (14° to
104° F) at 10% to 95% relative humidity non-
condensing.
The IND560 PDX can NOT be operated in areas
classified as Hazardous by the National Electrical Code
(NEC) because of the combustible or explosive
atmospheres in those areas. Contact an authorized
METTLER TOLEDO representative for information about
hazardous applications.
Operates at 85–264 VAC, 49–61 Hz, 750 mA (both
enclosure types).
Panel-mount version provides a terminal strip for AC
power connections.
Harsh environment version includes a power cord
configured for the country of use.
128 × 64 dot-matrix graphic VFD display, 21 mm
Display Update Rate: 10/second
Displayed resolution of 100,000 counts
POWERCELL™ PDX™
Up to 14 POWERCELL PDX load cells