Table Des Matières; Symbols; General Safety Instructions - Festool CXS Guide D'utilisation

Contents
Symbols ...............................................
Safety instructions...............................
Technical data......................................
Functional description.........................
Intended use ........................................
Operation .............................................
Settings................................................
Tool holder, attachments.....................
Working with the machine...................
Service and maintenance ....................
Accessories..........................................
Disposal ...............................................
Transport .............................................
Warranty ..............................................

Symbols

V volts
W watts
A amperes
Hz hertz
~ alternating current
direct current
d.c.
n no load speed
0

General safety instructions

WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
6
.../min
6
-1
min
6
h
8
min
9
s
9
kg
9
11
11
13
°C
13
Nm
14
mm
14
Ah
14
Wh
15
Warning of general danger
Risk of electric shock
Read the Operating Instructions/Notes!
Wear ear protection.
Wear protective gloves.
Max. chuck clamping
Safety instructions
1 WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
b) Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while oper-
ating a power tool. Distractions can cause you to
lose control.
2 ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapt-
er plugs with earthed (grounded) power tools.
Class II Construction
revolutions or reciprocation per minute
hour
minutes
seconds
kilograms
diameter
tip, hint
degree centigrade
Newton metre
millimetre
amps hour
watt hour